BENCH MOUNT RESIN DISPENSER

Dispensing polyester resin and catalyst is easy with the Robinson Bench Mount Dispenser.

Resin and catalyst are pumped and dispensed by either continuous flow or shot size amounts in an unmixed state thus avoiding any need for flushing with a solvent.

Catalyst is pressure fed from a 10 litre S/S tank through Robinson’s simple flowmeter system which is easy to see, easy to adjust and very low maintenance.

Resin flow per minute is controlled by the air pressure to the pump with low air pressure for low volume and higher pressure for higher volumes.

Dialing up the number of pump strokes gives an automatic dispensed amount of resin and catalyst. 

For an accurate amount of resin and catalyst, use the Robinson Bench Mount Resin Dispenser Unit.